L - Sealers and Shrink Tunnels

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

L Sealing

'L' Sealing Machines are ideal for bakery products such as

French sticks, tea cakes, barn cakes, croissants, cakes and breads.

CS3030

Impulse L Sealer

Specifically designed for use

with polypropylene bakery films.

Product Features

Stainless steel

Removable sealing base

Tamper proof heat settings (internal)

Removable plate and reel carrier

Dividing plate 150mm x 300mm

Easy wipe clean surface

None slip rubber feet

Technical Specification

Sealing area 300mm x 300mm

£1400.00 + Vat

Shipping £60.00 + Vat

£830.00 + Vat

£1259.00 + Vat

£320.00 + Vat

LS55 L Sealer

Range of 'L' sealers for bakeries.

Specifically designed for use with polypropylene bakery films.

The model LS55 'L' sealing machine is the largest model in the 'L' sealer range.

All the 'L' sealers feature an impulse sealing cycle through an electronic timer, giving clean seals without the need for expensive PTFE covers over the sealing wires.

The bakery product to be wrapped is loaded into the centre folded film through the dividing plate, then the product and film are moved to the left and into the sealing area of the 'L' sealer.

The sealing head is then lowered to initiate the two sealing wires to cut the film around the product.

Because the trailing seal from the last cycle has made the leading seal for the next pack and the film is already folded on the roll to give two open front edges, when you complete the seal you enclose the product in a complete bag.

The centre folded polypropylene film is available in various sizes to suit the bakery products to be wrapped.

A plain film is used for room temperature products and a perforated film for warm products to prevent condensation.

LS55 'L' Sealing Machines are ideal for bakery products such as French sticks, tea cakes, barn cakes, croissants, cakes and breads.

Product Features

Stainless steel food contact areas.

Timed impulse sealing cycle.

Twin roll film supports.

White epoxy paint finish.

Floor stand with locking castors – Optional extra.

Technical Specification

Sealing area – 550mm x 400mm.

Max pack height – 100mm.

Electric – 240v / 6amp.

Machine Dimensions – 1195mm x 765mm.

Weight – 50kg.

Option stand = £340.00 + Vat

£1699.00 + Vat

All centerfold shrink films can be viewed in our film page.

Polyolefin, PVC, Polypropylene,

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SL65 L-Sealer

Entry level to large L- Sealer machines

Sealing area 600mm x 500mm

Single wire head - cut and seal

Stainless steel dividing plate

Stainless steel adjustable pack table

£3200.00 + Vat

EDL John Quinn manufacture a range of end of-line shrink-wrap machinery that can cater for almost any packaging need.

The S range is an economical family of L sealers including models to seal almost any pack size desired.

All models are available with single wire sealing as standard, with 3 wire impulse sealing an option for stronger security seals.

Automated discharge conveyors for faster throughput are also available as an option.

PVC, Polyolefins, Polypropylene and polyethylene shrink films can be used.

Typical Applications

The S range of L sealers have been used successfully in a wide range of industries including food and beverages, cosmetics and toiletries, pharmaceuticals and printing.

Standard Features

Single wire sealing

Electromagnetic hold down

Adjustable height pack table

Floor stand with casters

Power epoxy stove enamel finish

L Sealer Prices and options

S66 Model

S66 Single Wire (Impulse) 660mm x 508mm = £5700.00 + Vat

S66 Single Wire (Impulse) with conveyor take off = £6942.00 + Vat

S66 3 Wire - Seal / cut / seal (Impulse) = £6432.00 + Vat

S66 3 Wire - Seal / cut / seal (Impulse) with conveyor take off = £7674.00 + Vat

Options

S66 Stainless steel dividing plate = £504.00 + Vat

S66 Spike Roll perforator = £504.00 + Vat

S66 Connecting conveyor to tunnel = £384.00 + Vat

S91 Model

S91 Single Wire (Impulse) 914mm x 610mm = £7320.00 + Vat

S91 Single Wire (Impulse) with conveyor take off = £8562.00 + Vat

S91 3 Wire - Seal / cut / seal (Impulse) = £8490.00 + Vat

S91 3 Wire - Seal / cut / seal (Impulse) with conveyor take off = £9726.00 + Vat

Options

S91 Stainless steel dividing plate = £588.00 + Vat

S91 Spike Roll perforator = £588.00 + Vat

S91 Connecting conveyor to tunnel = £456.00 + Vat

S121 Model

S121 Single Wire (Impulse) 1219mm x 762mm = £8544.00 + Vat

S121 Single Wire (Impulse) with conveyor take off = £9786.00 + Vat

S121 3 Wire - Seal / cut / seal (Impulse) = £9756.00 + Vat

S121 3 Wire - Seal / cut / seal (Impulse) with conveyor take off = £10980.00 + Vat

Options

S121 Stainless steel dividing plate = £654.00 + Vat

S121 Spike Roll perforator = £504.00 + Vat

S121 Connecting conveyor to tunnel = £504.00 + Vat

Options

3 Wire sealing (with PTFE sealing blinds)

Powered discharge conveyor

Stainless steel dividing plate (food use)

Hole piercing unit (electrical)

Perforating attachment

Scrap film wind up

Sealing area S66 - 660mm x 508mm

Sealing area S91 - 914mm x 610mm

Sealing area S121 - 1210mm x 762mm

Electrics - Single phase

Quality and Service

All machines bearing the EDL John Quinn name are manufactured in house by the companies own experienced engineers.

This allows complete control over quality and an after sales service second to none.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Audion L500SA Combined with TE-Matic 18 Shrink Tunnel

Audion L-Sealer

L500SA

This semi-automatic L-sealer can be used to pack your products in a safe, presentable way.

Easy adjustment/settings of these sealers guarantee flexibility and a high production quantity. L-sealers can also be used in combination with our separate shrink tunnels.

Seal Length 560mm x Width 430mm

Automatic cycle mode

Scrap film winder

Scrap film guide device

PTFE-coated sealing blade

Liquid cooling circuit

Control glass for cooling liquid level

Working height sealer and tunnel adjustable

Emergency button

Automatic transfer of the product to the shrink tunnel

Adjustable shrink delay time for sealing thin films

User-friendly control panel with LCD allowing:

Machine information

Counter

Sealing temperature setting

Conveyor speed

Automatic cycle mode setting

6 operating programs

Failure codes indication

L500SA  £4159.00 + Vat

L800SA  £5737.00 + Vat

Shipping at cost £350.00 + Vat

TE-Matic 18 Shrink Tunnel

The main features of the TE-MATIC tunnel are:

Adjustable shrink tunnel temperature

Adjustable conveyor speed

Tunnel air flow regulation by flaps

Tunnel conveyor with silicone coated rotating rollers

Control panel with back lighted LCD

Automatic cool down function for end of shift

Reduced power consumption

Rollers can be fixed for PE

6 working programs

£4242.00 + Vat

EV SHRINK TUNNELS

EV30PP Model

EV42PP Model

EDL John Quinn manufacture a range of end of-line shrink-wrap machinery that can cater for almost any packaging need. The EV range is an economical family of shrink tunnels designed for use on smaller, collated packages as well as sales and display items. Models are available to handle PVC, Polyolefins, Polypropylene and polyethylene shrink films.

STANDARD FEATURES

Heat resistant rubber silicone conveyor belt

Under belt heater plate

Heating elements

Adjustable temperature controller

Variable speed drive

Floor stand with castors

Power epoxy stove enamel finish

or stainless steel.

EV30PP

Tunnel opening - 304mm x 203mm

Electrical supply - 240v Single phase - 2.875KW

Suitable films - PVC, Polythene, Polyolefin

EV42PP

Tunnel opening - 420mm x 203mm

Electrical supply - 3 Phase - 5.375KW

Suitable films - PVC, Polythene, Polyolefin

Typical Applications

The EV range of shrink tunnels have been used successfully in a wide range of industries including food and beverages, cosmetics and toiletries, pharmaceuticals and printing.

The ranges versatility in terms of shrink films handled allows both display and/or transit packs to be produced.

Quality and Service

All machines bearing the EDL John Quinn name are manufactured in house by the companies own experienced engineers.

This allows complete control over quality and an after sales service second to none.

EV30PP

Tunnel opening - 304mm x 203mm

Electrical supply - 240v Single phase - 2.875KW

Suitable films - PVC, Polythene, Polyolefin

Standard Features

Heat resistant rubber silicone conveyor belt

Under belt heater plate

Heating elements

Adjustable temperature controller

Variable speed drive

Floor stand with castors

Power epoxy stove enamel finish

£4350.00 + Vat

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------